Cabletron Systems SEHI-32 - Manual (Page 82)

LOCAL MANAGEMENT
Page 6-25
Selecting the Appropriate Module/Port
When the Device Statistics screen first appears, statistics are
displayed for Module 1 and Port 1. To view statistics for another
module and port, use the Module x or Port x commands at the
bottom of the screen.
To select a module or port:
1. Use the arrow keys to highlight the Module or Port command.
2. Press the shift and + keys, or the - key until the desired module or
port number appears.
3. Press the Return key. Statistics associated with the selected
Module and Port appear.
Using the Enable Port Command
The Enable Port command lets you enable the port selected in the Port
command. You must first use the Port command to select the desired
port.
To set the Port Enable command:
1. Use the arrow keys to highlight the Enable Port command at the
bottom of the screen.
2. Press the Return key. The corresponding port is enabled and the
Port Admin Status field is updated.