Cabletron Systems SEHI-32 - Manual (Page 79)

LOCAL MANAGEMENT
Page 6-22
Exiting the SNMP Tools Screen
1. Use the arrow keys to highlight the RETURN command.
2. Press the Return key. The Feature Selection screen appears.
6.3.5 The Device Statistics Screen
This section describes the features of the Device Statistics screen. You
can view error, collision, and traffic statistics for the stack, a selected
module, or a selected port. You can also enable and disable ports.
To access the Statistics screen from the Features Selection screen, use
the arrow keys to highlight the Device Statistics option, then press
the Return key. The Device Statistics screen shown in Figure 6-8
appears.
Figure 6-8. Device Statistics Screen
The following sections describe Device Statistics screen fields and
instructions on how to change them.
SEHI LOCAL MANAGEMENT
Cabletron SEHI Revision X.XX.XX
DEVICE STATISTICS
STACK TOTAL
3792125
16547
0
0
0
0
0
0
0
0
MODULE: 1
67960
255
0
0
0
0
0
0
0
0
PORT: 1
67960
255
0
0
0
0
0
0
0
0
ENABLE
UNSEGMENTED
BYTES RECEIVED:
FRAMES RECEIVED:
ERRORS RECEIVED:
COLLISIONS:
OOW COLLISIONS:
CRC ERRORS:
ALIGNMENT ERRORS:
RUNT PACKETS:
GIANT PACKETS:
PORT ADMIN. STATUS:
PORT SEG. STATUS:
ENABLE PORT DISABLE PORT
UPDATE -FREQ 3 Sec MODULE 1 PORT 1 RETURN