Local management – Cabletron Systems SEHI-32 User Manual
Page 58
LOCAL MANAGEMENT
Page 6-1
CHAPTER 6
LOCAL MANAGEMENT
This chapter explains how to set up a management terminal to access
the SEHI’s Local Management. It also explains how to use the Local
Management screens and commands.
Local Management supplies the tools to manage the SEHI and all of
its attached segments. You can:
•
assign an IP address and subnet mask
•
select a default gateway
•
control access to the SEHI through the community names
established in the Community Name Table
•
designate which Network Management Workstations receive
trap messages from the device
•
navigate through the Management Information Base (MIB)
and manage the objects within it from a remote location. Given
the appropriate security level, the MIB is accessible from the
SEHI through SNMP Tools.
Local Management also lets you manage each of the non-intelligent
stackable hubs attached to the SEHI. You can also use the Statistics
screen to view error, collision, and traffic statistics for the entire stack,
individual module, or individual port.