Changing playback functions, Changing the start-up image or sound, Sound – Canon SX200 LS User Manual
Page 146: P. 146), Change sounds, Changing the start-up screen
146
You can adjust the settings in the
1 tab by pressing the 1 button
.
Selecting the Image that First Displays
in Playback
●
Select [Resume], then press the
qr buttons
to select an option.
In the
3 tab, you can set one of your recorded images as the start-up image
when the camera power is turned on, or change the sounds played for each
camera operation with your recorded sounds.
Change Sounds
●
Select [Sound Options], then press the
m
button.
●
Press the
op buttons or turn the  dial to
select an option.
●
Press the
qr buttons to select a setting.
Changing the Start-up Screen
●
Select [Start-up Image], then press the
m
button.
●
Press the
qr buttons to select a setting.
Changing Playback Functions
Last shot
Resumes with the most recently shot
image.
Last seen
Resumes with the image last viewed.
Changing the Start-up Image or Sound
1
Preset sounds.
2
You can register your sounds using the supplied
software (ZoomBrowser EX/ImageBrowser)
.
No start-up image.
1
Preset images.
2
You can register your images.