Compaq MP1400 - Manual (Page 67)

Flash ROM Upgrade C-1
Writer M. Silvetti Saved by: Marianne Silvetti Saved date: 05/12/00 4:31 PM
Pages: 2 Words: 200 Template: c:\office 95\templates\emd book.dot
Part Number: 177284-001 File name: Dappc.doc
appendix C
Flash ROM Upgrade
The Compaq MP1400 Microportable Projector can be upgraded
by flashing the ROM (Read Only Memory) on the projector.
NOTE: Before attempting these steps, make sure the projector is
turned off.
The Flash ROM upgrade provides the following functions:
■ Implements new features on the projector.
■ Provides upgrades to existing features.
■ Resolves compatibility issues.
First, locate the following items in the Compaq MP1400
Microportable Projector shipping box:
■ DFP to DVI cable
■ RS232 to DVI upgrade adapter
To upgrade the projector’s ROM, complete the following steps:
1. Connect the DFP end of the cable to the DFP connector on
the projector and the DVI end of the cable to the input end of
the Flash ROM RS232 adapter.
2. Connect the other end of the Flash ROM RS232 adapter to
the RS232 (serial) connector on the computer.