Compaq MP1400 - Manual (Page 33)

2-8 MP1400 Microportable Projector
Part Number: part number 177284-001 - Writer: Marianne Silvetti - Saved by: Marianne Silvetti
Pages: 8 Words: 1421 Saved date: 05/12/004:32 PM File Name: Chap2.doc
When the optional Compaq Multimedia Adapter is attached to the
projector, the following messages, in addition to the previous
messages, will appear on the projection display to identify the
following conditions:
■ Analog, Use Source to change input—Indicates Analog and
DVI inputs are both connected. Since the projector will default
to display Analog, you must use the Source button to switch to
DVI.
■ DVI, Use Source to change input—Indicates DVI along with
other video sources and/or analog sources are present. Analog
is the default setting. Use the Source button to switch to DVI.
■ Analog, Use PIP for picture-in-picture or use Source to
change input—Indicates Analog plus video and DVI are
present. Audio is the default setting. Use PIP for picture-in-
picture, or change setting using the Source button.
■ Composite Video, Use Source to change input—Indicates
Composite Video or other inputs present. Default is Composite
Video. Use the Source button to change the setting.
■ S-Video, Use Source to change input—Indicates S-video with
other inputs are active. Use the Source button to change the
setting.