Connecting to other video sources – Compaq MP1400 User Manual
Page 17
1-10
MP1400 Microportable Projector
Part Number: part number 177284-001 - Writer: Marianne Silvetti - Saved by: Marianne Silvetti
Pages: 18 Words: 2366 Saved date: 05/12/004:32 PM File Name: Chap1.doc
✎
Be sure the signal cable aligns with the connector. Do not
force the cable onto the connector or you may damage the
signal cable or the projector.
3. Turn on the projector first, then turn on the
computer. Refer to the “Powering On the Projector”
section later in this chapter for instructions on
turning on the projector.
Connecting the Projector to Other Video Sources
To connect the projector to a camcorder, DVD player, or VCR, the
optional Compaq Multimedia Adapter must be connected to the
projector. The optional Compaq Multimedia Adapter has been
specifically designed to fit the Compaq MP1400 Microportable
Projector. This adapter converts signals from the camcorder, DVD,
or VCR, for compatibility with the projectors.
✎
The optional Compaq Multimedia Adapter is not included
with the Compaq MP1400 Microportable Projector. It is sold
separately and includes a remote control. For information on
purchasing the optional Multimedia Adapter and remote
control, call your Compaq authorized dealer, or reseller. To
locate a reseller near you, call 1-800-AT-COMPAQ or, to
purchase directly from Compaq, visit the Compaq web site
For information on attaching and using the optional Compaq
Multimedia Adapter, refer to Chapter 3,