Compaq MP1400 - Manual (Page 13)

1-6 MP1400 Microportable Projector
Part Number: part number 177284-001 - Writer: Marianne Silvetti - Saved by: Marianne Silvetti
Pages: 18 Words: 2366 Saved date: 05/12/004:32 PM File Name: Chap1.doc
Connecting the Projector to a
Portable Computer
1. Rotate the elevator foot to balance the projector.
2. Connect one end of the projector signal cable to the
projector and the other end to the VGA connector
1B or
the DFP connector
1A on the portable computer and
tighten the screws. Use the VGA cable OR the DFP
cable; do not connect both cables.
✎ Be sure the signal cable aligns with the connector. Do not
force the cable onto the connector or you may damage
the signal cable or the projector.
3. Connect one end of the power cord
2 into the back
of the projector, and the other end to an electrical
outlet that is easily accessible and close to the
projector.
4. Turn on the projector first, then turn on the
computer.
✎ For more information on setting up the projector with a portable
computer, see the white paper included on the CD-ROM.