Compaq MP1400 User Manual
Page 53
MP1400 Microportable Projector
5-5
Part Number: part number 177284-001 - Writer: Marianne Silvetti - Saved by: Marianne Silvetti
Pages: 6 Words: 970 Saved date: 05/12/004:34 PM File Name: Chap5.doc
To replace the projector lamp module, follow these steps:
1. Turn off the power to the projector by pressing the
Standby button
1.
2. Allow the projector to cool down for at least 30
minutes.
!
WARNING:
The lamp assembly operates at a very high
temperature. To reduce the risk of personal injury, allow the
projector to cool down for at least 30 minutes before opening
the lamp cover. Never open the lamp cover while the projector
is operating or when the lamp is hot.
3. Turn off the main power switch
2.
4. Disconnect the power cord
3.