Brocade m4424 san i/o module – Dell PowerEdge M600 User Manual

Page 47

Text mode
Original mode

Configuration Guide

Brocade M4424 SAN I/O Module

The Brocade M4424 SAN I/O module includes eight external autosensing
Fibre Channel ports (four ports are enabled in the standard configuration and
four additional ports may be enabled as an optional upgrade), 16 internal
ports, and one serial port with an RJ-45 connector. The external Fibre
Channel ports operate at 1 Gb/sec, 2 Gb/sec, or 4 Gb/sec. The Fibre Channel
switch module is hot-pluggable, and may be installed in Fabric B or Fabric C.

NOTE:

The Fibre Channel switch module includes Short Wave Small Form Factor

Pluggable (SFP) optical transceivers. To ensure proper functionality, use only SFPs
provided with this module.

U003Cbk0.book Page 45 Wednesday, July 30, 2008 12:19 PM