Dell PowerEdge Rack Enclosure 2420 - Manual (Page 21)

Installation Guide
19
1 Using a screwdriver, lower the leveling foot until it rests on the floor.
2 If you need to lower the foot further, tighten the hex nut clockwise
with a 12-mm wrench (see Figure 1-10).
Figure 1-10. Adjusting the Leveling Feet
3 Repeat steps 1 and 2 for the remaining leveling feet.
4 Ensure that the rack is level.
1 leveling foot stem 2 hex nut
3 leveling pad
3
1
2