Dell PowerEdge Rack Enclosure 2420 - Manual (Page 10)

8
Installation Guide
• Keys to the rack doors and side panels (included in the rack kit)
• 13-mm wrench (for rack removal from pallet)
• 17-mm wrench (for rack removal from pallet)
Removing and Replacing the Rack Doors
WARNING:
When storing the doors, lay the doors flat so they cannot fall
over and accidentally injure someone.
Removing the Front Door
1 Pull the door latch and open the front door all the way (see Figure 1-1).
2 While holding the door, pull the top hinge pin upward so that it clears
the door’s hinge-pin housing (see Figure 1-1).
The hinge pin’s retention clip prevents the hinge from being pulled out
of the hinge body.
Figure 1-1. Removing the Front Door
1 door latch 2 hinge pin
3 hinge body 4 hinge-pin housing
4
2
3
1