8technical specifications – Baumer BA DenexMicro User Manual
Page 15
User Manual DENEX MICRO
15/24
Baumer Electric AG
Version 2013-02, V1.6
www.baumer.com
Frauenfeld, Switzerland
8
TECHNICAL SPECIFICATIONS
Maximum Count Rate
< 600.000 copies/hour
Maximum Product Speed
1 m/s (200 ft/min) for thinnest product, up to 2 m/s otherwise
Maximum Stream Thickness
70 mm (2.76”) standard range
Minimum Product Thickness
0,25 mm (0.01”) standard range,
Distance From Conveyor
100 mm (3.94”) standard range,
Minimum Spacing Between Copies
1-5 mm (0.039-0.20”) dep. on thickness, speed and pulse width
Stream Conditions
All conditions
Operating System
RISC microprocessor
Pulse Width
5 ms (preset) or 20 ms
Output Signal
Opto-isolated 5 to 30 V max. 150 mA
Speed Sensor Input
4.5 - 28 VDC, 3 mA, max. 2.5 kHz
Matching Connector
Amphenol-Tuchel C91A T 3476 001
Laser System
Visible, switched laser diode, 650 nm, with laser safety monitor
Laser Safety Class
Class II
Estimated Lifetime of Laser
> 30,000 h @ 20ºC
Weight
800 g, 1.75 lbs.
Size
175 x 96 x 31mm, 6.89 x 3.78 x 1.22”
Power
24 V DC. 150 mA typical
Temp. Range
+10 to 40ºC, 50 to 104ºF
DENEX MICRO is a Class II Laser Product.