beautypg.com

Machine controls, Machine functions, User guide & capacity chart – Cuisinart 7-Cup Elite Collection Food Processor MFP-107 Series User Manual

Page 9: Using the metal blade chopping, Puréeing, Reversible slicing/shredding disc, Facing page)

background image

8

MACHINE CONTROLS

On Button

The On control is a continuous button that
allows the machine to run until Off is selected.

1. Properly assemble and engage the

machine.

2. Add ingredients to the work bowl, either

through the feed tube or directly into the
bowl.

3. Press the On button. The blue LED light will

illuminate and the motor will start.

4. Press the Off button when finished.

Pulse Button

The Pulse control is a button that allows the
machine to run only while it is being pressed.
This capability provides more accurate control
of the duration and frequency of processing.
Unless otherwise specified, a pulse is about one
second.

1. With the machine properly assembled and

engaged, and ingredients in the work bowl,
press the Pulse button repeatedly as
needed. The blue LED On light will be
illuminated upon activation.

MACHINE FUNCTIONS

Using the Metal Blade
Chopping

• For raw ingredients: peel, core and/or remove

seeds and pits. Food should be cut into even,
½ to 1-inch pieces. Foods cut into same size
pieces produce the most even results.

• Pulse food in 1-second increments to chop.

For the finest chop, either hold the pulse down
or press ON to run the machine continuously.
Watch ingredients closely to achieve desired
consistency and scrape the work bowl as
necessary.

Puréeing

• To purée fresh fruits or cooked fruits/

vegetables: Ingredients should be cut into
1-inch pieces; a smooth purée is achieved
easiest when all the pieces are equal in size.
Pulse to initially chop and then process ON
until food is puréed; scrape the work bowl as
necessary. Do not use this method to purée
cooked white potatoes.

• To purée solids for a soup or sauce: Strain

the solids from the liquid and process the
solids alone. Add cooking liquid and process
as needed.

Reversible Slicing/Shredding Disc

• Always pack food in the feed tube evenly

for slicing and shredding. The food will dictate
the amount of pressure: Use light pressure for
soft foods, medium pressure for medium
foods, and firm pressure for harder foods.
Always process with even pressure.

• For round fruits or vegetables: Remove a thick

slice on the bottom of the food so that it sits
upright in the feed tube. If food does not fit in
the feed tube, cut in half or quarters to fit.
Process with even pressure.

• For small ingredients, like mushrooms,

radishes or strawberries: Trim the ends so the
food sits upright in the feed tube.

• When slicing or shredding cheese, be sure

that the cheese is well chilled before slicing.

• To shred leafy vegetables like lettuce or

spinach: Roll leaves together and stand up
in feed tube. Process with even pressure.

USER GUIDE & CAPACITY
CHART

(facing page)

You can slice, shred and chop a multitude of
vegetables and fruits in the Cuisinart Food
Processor. What you may not know is that the
food processor is the perfect tool for a number
of other tasks, such as softening butter, making
bread crumbs, making baby food, etc. Here is a
guide that will help you in preparing just about
anything!