Baumer GK473 - Manual (Page 23)

Manual_GK473_S7_Profibus_EN.doc 23/32 Baumer IVO GmbH & Co. KG
04.05.11 Villingen-Schwenningen, Germany
3.14 Structure of profile data block DB98
Profile data block DB98 implies all profiles of each single SPA connected .The individual targets are
written into the data block in successive order and each SPA is capable of memorizing up to 100
targets. When adapting this data block it has to be made sure that it is in line with function FC14. For
example, the DB is not only for storing targets but also other data, or maybe only 15 profiles are
required instead of 100. Since the offset is explicitly calculated by permanent values it has to be
considered in the calculation. If further values besides the targets have to be stored or read in, the
additional output variables must be defined in the function.
: : : : : : :
: : : : : : :
: : : : : : :
: : : : : : :
: : : : : : :
: : : : : : :