Baumer GK473 - Manual (Page 16)

Manual_GK473_S7_Profibus_EN.doc 16/32 Baumer IVO GmbH & Co. KG
04.05.11 Villingen-Schwenningen, Germany
U E 0.3 // Reset key operated? (at input module group ID 0)
SPBN NOCL // clear outputs ID 4 and 5 of OB82
L W#16#0
T AW
4
NOCL NOP 0
CALL SFC 14 // Read input data to DB10
LADDR :=W#16#14 // E/A range of the gateways starts with 20d=14h
RET_VAL:=MW10 // Status and error messages after memory word 10
RECORD :=P#DB10.DBX 0.0 BYTE 16 // Target is data block DB10, start byte 0,
// Length 16 bytes
CALL SFC 15 // Output of output data of DB11
LADDR :=W#16#14 // E/A range of the gateways starts with 20d=14h
RECORD :=P#DB11.DBX 0.0 BYTE 16 // Source is data block DB11,
// Start byte 0, length 16 bytes
RET_VAL:=MW11 // Status- and error messages after memory word 11
L MD 1 // Visualized by LEDs of
// output module group ID 6 and 7
+ L#1 // add Long 1 to AKKU1 (increment)
T MD 1 // Double memory word 1
T AW 6 // Output module group here on IDs 6...7
NOP 0