Clarion DB625MP - Manual (Page 9)

280-7815-00
DB625MP
13
6. OPERATIONS
Basic Operations
Power
● Turning ON the Power
Press the [FNC] button.
●
Turning OFF the Power
Press the [FNC] button for at least 1 second.
Selecting the Source
Press the [FNC] button.
Source required Display
Tuner “TUNER”
CD “CD”
Standby “ALL OFF”
(Illumination only mode)
Volume
●
Increasing Volume
Press the [ ] button.
●
Decreasing Volume
Press the [ ] button.
Mute
Turning the volume down quickly.
Press the [MUTE] button.
Each time the button is pressed the Mute turns
ON or OFF.
When it’s ON, the “MUTE” indicator blinks.
Loudness
Compensating for low and high tones during low
volume.
Press the [MUTE] button for at least 1 sec-
ond.
Each time the button is pressed for at least 1
second the Loudness turns ON or OFF.
When it's ON, “LOUD ON” is displayed.
Beat EQ Light
You can recall the best sound setting preset for
different types of the music.
1. Select the source to set
Press the [FNC] button.
2. Select the Sound type
Press the [BEQ LIGHT] button.
Each time the button is pressed the sound set-
ting switches.
Sound setting Display
User memory “User”
Rock “Rock”
Pops “Pops”
Easy “Easy”
Top 40 “Top40”
Jazz “Jazz”
Flat “Flat”
Notes:
• User memory: The values set on the
Mode>.
• Each setting value is changed with the
Setting>. First, select the speaker type with the
Speaker setting.
Audio Mode
1. Select the source for adjustment
Press the [FNC] button.
2. Enter Audio mode
Press the [BEQ LIGHT] button for at least 1
second.
3. Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed the items that
can be adjusted switch as shown below.
4. Adjust the Audio item
Press the [ a] or [d] button.
Adjustment
Item
Display Range
Bass level “Bas” –8 ~ +8
Middle level “Mid” –8 ~ +8
Treble level “Tre” –8 ~ +8
Balance “Bal” Left 15 ~ Right 15
Fader “Fad” Rear 15 ~ Front 15
Volume offset “V-OFF” –8 ~ ±0
Note:
• Volume offset: Each source’s volume can be set
as a difference from the basic volume.
5. Exit Audio mode
Press the [BEQ LIGHT] button.
Note: Be sure to read this chapter referring to the front diagrams of
chapter “2. CONTROLS” on page 5 (unfold).
280-7815-00_009-030 (En) 4/2/02, 4:58 PM 13