Clarion DB625MP - Manual (Page 15)

280-7815-00
DB625MP
19
Adjustment Menu
Adjustment Menu
Setting during operation beep sound etc. func-
tions.
The Adjustment menu basic operation method is
explained here. The reference for the Adjustment
menu items and their setting content is after this
operation explanation.
1. Enter Adjustment menu mode
Press the [ ] button for at least 1 second.
“MENU” is displayed.
2. Select the Adjustment menu item
Press the [FM] or [AM] button.
Example: When you want to set the beep
sound select the “Beep” display.
3. Set the Adjustment menu item
Press the [ a] or [d] button.
Example: When “Beep” is selected, each time
the button is pressed it switches
“Beep ON” or “Beep OFF”. Select 1
of them as the setting.
You can continue by returning to step 2 and
setting other items.
4. Exit Adjustment menu mode
Press the [ ] button.
Note:
• When other items that are applicable to the basic
operation method above are displayed afterwards
their setting content chart is entered. (Normally the
uppermost setting in the chart is the original set-
ting.)
Also, the explanation for items that aren’t appli-
cable (etc.) are en-
tered step by step.
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
Display Setting
“Beep ON” Beep is heard.
“Beep OFF” Beep canceled.
Manual Clock Adjustment
1. Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the “CLK ADJ” display.
2. Enter Clock Adjust mode
Press the [ a] or [d] button for at least 1
second.
The clock display blinks.
3. Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [ a] or [d] button.
4. Exit Clock adjustment mode
Press the [ ] button.
Note:
• At the time of clock adjustment, when only a
change of the hour is made, it is not adjusted to
00 seconds. Only when the minute is changed, it
is adjusted to 00 seconds.
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the face-
plate is removed, warning potential thieves.
Display Setting
“DSI ON” LED flashes.
“DSI OFF” LED OFF.
Selectable Illumination
Selecting the button illumination color as green
or red.
Display Setting
“KEY GRN” The illumination color is green.
“KEY RED” The illumination color is red.
Switching Display Type
Setting the Display type.
Display Setting
“DisplayD” Demonstration.
“DisplayA” Circle Display is play time.
“DisplayB” Circle Display is clock.
“DisplayC” Silent display type.
280-7815-00_009-030 (En) 4/2/02, 4:58 PM 19