Electronics – Dodge 2013 Dart - User Guide User Manual
Page 76
Screen Setup
• Press and release the UP
or DOWN
button until the Screen Setup display icon
is highlighted in the EVIC. Press and release the RIGHT
button to enter the Screen
Setup sub-menu. The Screen Setup feature allows you to change what information is
displayed in the instrument cluster as well as the location that information is displayed.
• Press and release the UP
or DOWN
button until the Screen Setup display icon
is highlighted in the EVIC. Press and release the RIGHT
button to enter the Screen
Setup sub-menu. The Screen Setup feature allows you to change the location that
information is displayed within the instrument cluster. Use the UP and DOWN buttons to
highlight a screen setup location (i.e., Upper Left, Upper Right, etc.) then press the RIGHT
arrow button to select the location and make changes. Press the UP and DOWN buttons
to select the information you would like to display in that location (i.e., Date, Time,
Outside Temp, etc.) and press the RIGHT arrow button to save the display setting. You can
press the LEFT arrow button at any time to back out of a sub-menu selection.
NOTE:
This option is only available when the vehicle is in the Park position.
Driver Selectable Items
Speedometer
•
Analog 1
•
Analog 2
•
Digital 1 (default setting)
•
Digital 2
Gear Display
•
Standard (PRND –/+) (default setting)
•
Single Character (D)
•
Word (Drive)
Upper Left
•
None
•
Compass
•
Outside Temp (default setting)
•
Date
•
Time
•
Distance To Empty (DTE)
•
Average MPG
•
Current MPG
•
Trip A
•
Trip B
ELECTRONICS
74