Electronics – Dodge 2013 Dart - User Guide User Manual

Page 65

Pairing a Phone

• To use the Uconnect® Phone feature, you must first pair your Bluetooth® phone with the

Uconnect® system.

NOTE:
For Voice Command enabled phone pairing, refer to your vehicles Owner's Manual for
details.

Start pairing procedure on the radio

• Touch the Phone soft-key and then the Set-

tings soft-key. Next, touch Add Device.

• Uconnect® Phone will display an “In prog-

ress”

screen

while

the

system

connecting.

Start pairing procedure on mobile phone

• Search for available devices on your

Bluetooth® enabled mobile phone. This is
usually within Settings or Options under
“Bluetooth”. See your mobile phone’s
manual for details.

NOTE:
For assistance in pairing your phone, contact Uconnect® customer support at 1–877–855–8400
or visit www.UconnectPhone.com.

• When your phone finds the system, select “Uconnect” as the paired device.

Complete the pairing procedure

• When prompted on the phone, enter the

4-digit

number

shown

the

Uconnect® Screen.

• If your phone asks you to accept a con-

nection request from Uconnect, select
“Yes”. If available, check the box telling it
not to ask again – that way your phone will
automatically connect each time you
start the vehicle.

Select the mobile phone's priority level

• When the pairing process has success-

fully completed, the system will prompt you to choose whether or not this is your favorite
phone. Selecting Yes will make this phone the highest priority. This phone will take
precedence over other paired phones within range. Only one phone can be connected at
a time.

• You are now ready to make hands-free calls. Press the Uconnect® Phone button on your

steering wheel to begin.

ELECTRONICS