Shift lever override, Towing a disabled vehicle, Shift lever override towing a disabled vehicle – Dodge 2013 Dart - User Guide User Manual
Page 102: What to do in emergencies
SHIFT LEVER OVERRIDE
• If a malfunction occurs and the shift lever
cannot be moved out of the PARK posi-
tion, you can use the following procedure
to temporarily move the shift lever:
• Turn the ignition switch to the OFF posi-
tion.
• Firmly set the parking brake.
• Remove the rubber storage tray liner
from the center console, then lift up the
front of the shift lever bezel, carefully
disengage the bezel from the shift lever
housing, and slide it up to the top of the
shift lever.
• Press and maintain firm pressure on
the brake pedal.
• Insert a small screwdriver or similar tool
down into the access slot at the front of the shift lever assembly, and push and hold the
white override release lever down.
• Move the shift lever into the NEUTRAL position.
• The vehicle may then be started in NEUTRAL.
• Reinstall the shift lever bezel (use care to avoid pinching the wiring), and the rubber
storage tray liner.
TOWING A DISABLED VEHICLE
Towing Condition
Wheels OFF The
Ground
AUTOMATIC TRANS-
MISSION
MANUAL TRANSMIS-
SION
Flat Tow
NONE
NOT ALLOWED
Transmission in
NEUTRAL
Wheel Lift or Dolly
Tow
Rear
NOT ALLOWED
NOT ALLOWED
Front
NOT ALLOWED
NOT ALLOWED
Flatbed
ALL
BEST METHOD
BEST METHOD
WHAT TO DO IN EMERGENCIES
100