Cta dme step values, North up or track up, View ownship on the enroute map – Jeppesen FliteDeck Pro (iOS) User Manual

Page 41

Viewing Enroute Map Information

North Up or Track Up

Jeppesen FliteDeck Pro User Guide

October 2014

For example, to enter the LBSTA Three RNAV Departure out of
KBOS, departing on Runway 22L, via the LBSTA enroute
transition, you would enter: 22L.LBSTA3.LBSTA

NOTE The depiction of SID and STAR transition points on the
enroute map is provided to support situational awareness only.
Always brief the SID or STAR terminal procedure.

CTA DME Step Values

CTA DME step values appear around airports in Australia and
New Zealand when Airspace is set to show on the enroute map.

To view CTA information, touch, hold, and release the CTA
boundary. You might need to select a specific CTA to review its
information.

North Up or Track Up

To change the enroute map orientation, tap the North Up or
Track Up button to switch between orientations.

NOTE To change the orientation to Track Up, Enable Moving
Map in JeppFD-Pro global settings must be set to ON.

View Ownship on the Enroute Map

The current aircraft position is available on the enroute map when
both Enable Moving Map and Display Ownship on Enroute in
JeppFD-Pro global settings are set to ON and the minimum GPS
accuracy requirement is met.