Jeppesen FliteDeck Pro (iOS) - Manual (Page 32)

Sharing Flight Information
Share a Route – App to App
October 2014 Jeppesen FliteDeck Pro User Guide
Copyright © 2014 Jeppesen. All rights reserved.
25
What is Shared
–
Device to Device
When you share flight information from one iPad running
Jeppesen FliteDeck Pro to another, the following is shared:
• Origin, destination, and any alternate airports
• Navaids, waypoints, (including user-defined waypoints),
and airways entered into the route description
• Selected terminal charts for the flight
NOTE Both devices must include the terminal chart coverage
area of the selected terminal chart to successfully share the
selected chart.
When you share flight information from one iPad running
Jeppesen FliteDeck Pro to another, the following is NOT shared:
• Highlights on terminal charts
• Rotated view of terminal charts
• Comments associated with a saved user-defined waypoint
Share a Route
–
App to App
You can import a route from a flight-planning app if it is set up to
share with Jeppesen FliteDeck Pro. To share a route from a flight-
planning app with FliteDeck Pro:
1. Load the route in the flight-planning app.
2. Select the option to share with Jeppesen FliteDeck Pro.
Jeppesen FliteDeck Pro opens and displays a notification
that an app would like to share a flight.
3. From FliteDeck Pro, select Load, Save, or Decline.
• Tapping Load loads the route as the active flight.
• Tapping Save adds the route to the list of FliteDeck Pro
saved flights.