Add sids and stars – Jeppesen FliteDeck Pro (iOS) User Manual

Page 24

Setting Up Your Flight

Create a New Flight

October 2014

Jeppesen FliteDeck Pro User Guide

Add SIDs and STARs

After you enter origin and destination airports, you can enter a
SID or a STAR (or both) in the route description.

To render SID or STAR transition points on the enroute map use
this format:

• For a SID, enter: rwy.SID.transition

• For a STAR, enter: transition.STAR.rwy

For example, to enter the LBSTA Three RNAV departure out of
KBOS, departing on Runway 22L, via the LBSTA enroute
transition, you would enter: 22L.LBSTA3.LBSTA

When the runway is a part of the route description, transition
points are depicted on the enroute map by a dashed line and a
label that identifies the procedure appears along the dashed line.
In addition, Jeppesen FliteDeck Pro adjusts the flight distance
that appears in the Flight Info drawer.

NOTE The depiction of SID and STAR transition points on the
enroute map is provided to support situational awareness only.
Always brief the SID or STAR terminal procedure.