NISSAN 2013 Quest - Navigation System Owner's Manual - Manual (Page 68)

Black plate (68,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
4-6 Setting destination
4. Highlight the preferred destination from the
list, and push . The position of
the selected location is displayed in the
preview on the right side of the screen.
INFO:
. A maximum of 100 facilities can be
displayed on the list screen.
. To search for facilities along your route,
select [Show Along Route].
5. The entire route is shown on the map.
Highlight [Start] after confirming the location
of the displayed destination, and push
. The system sets the destination
to the selected location and starts calculat-
ing a route.
INFO:
If there is a route already set, the newly selected
location can substitute a previously set destina-
tion or be added to a route already set.
Other settings:
The destination can also be set by pushing
in the current or scrolled location
map screen and selecting [Nearby Places].
Voice command
1. Push > located on the steering
wheel switch.
2. After the tone sounds, speak a command.
To display the nearby category list and select the
destination from it:
“Navigation” “Places” (Standard mode)
“Places” (Alternate command mode)
Searching by other methods
1. Push .
2. Highlight [Places] and push .