NISSAN 2013 Quest - Navigation System Owner's Manual User Manual
Page 12

Black plate (12,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
2-4
Getting started
Type E
*
1
Push multiple times to display audio in-
formation with either the air conditioner
status, fuel economy or navigation direc-
tions.
*
2
Push to enter a destination. Various meth-
ods for entering a destination are available.
“4. Setting destination”
*
3
Push to access guidance control functions
(guidance cancellation, route priority, way-
point setting on the route, etc.).
*
4
Multi-function controller:
Turn to highlight an item on the screen,
push to select the highlighted item or scroll
the map.
*
5
Push to display the vehicle, traffic, weather
or voice recognition information.
*
6
:
Push to switch between the day screen
(bright) and the night screen (dark). Push
and hold to turn off the display. Push again
to turn on the display.
*
7
Push to access the system settings.
*
8
Push to hear the current guidance for a
programmed route.
*
9
Push to return to the previous screen. In a
settings screen, this button can also be
used to apply the setting.
In a character input screen, this button can
also delete the characters that have been
entered.
*
10
:
Push to display the map. While following
programmed route, push multiple times to
change the type of route information.
*
11
Push to switch to the zoom mode to
change the map scale.
*
12
Push to access the display settings.
INFO:
.
If
the setting on a settings screen, this manual
will explicitly include a step for this proce-
dure. Otherwise, pushing
the display to the previous screen.
.
The layout of the control panel switches may
vary depending on the vehicle model and
equipment.