NISSAN 2013 Quest - Navigation System Owner's Manual - Manual (Page 14)

Black plate (14,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
2-6 Getting started
Type B
Type C
*
1 :
Tilt to highlight an item on the screen or
adjust a setting. Push to select the high-
lighted item.
If this button is pushed while a map is
displayed, the map menu screen is dis-
played.
“Map menu screen” (page 2-17)
Push and hold while a map or status screen
is shown to display the Start Menu.
“Start menu” (page 2-12)
If this button is tilted up while the audio
function is activated and the map or status
screen is displayed, the audio system can
be operated.
*
2 < >:
Push this button during a setting operation
to return to the previous screen. In a
settings screen, this button can also be
used to apply the setting.
*
3 <+ −>:
Use to adjust the volume. These buttons
have the same function as that of the
volume control knob. Refer to the vehicle
Owner’s Manual.
*
4 >:
Push to start the voice recognition mode. If
the voice recognition mode is already
activated, pushing this button cancels the
voice guidance and you can speak a voice
command immediately.
*
5 < >:
Push to display the phone mode screen.
Refer to the vehicle Owner’s Manual.
*
6 :
Use to switch the audio mode (source).
Refer to the vehicle Owner’s Manual.
*
7 < >:
Push to change what is shown on the
vehicle information display.
Refer to the vehicle Owner’s Manual.