NISSAN 2013 Quest - Navigation System Owner's Manual - Manual (Page 105)

Black plate (105,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
information event on the route.
Voice command
1. Push > located on the steering
wheel switch.
2. After the tone sounds, speak a command.
To turn on or off the Voice Guidance:
“Voice Guidance On/Off” (Alternate com-
mand mode)
RECALCULATING ROUTE
The route can be searched for again manually
after changing the search condition. When the
vehicle deviates from the suggested route, the
route from the current location to the destination
is automatically searched again.
Re-searching route manually
1. Push .
2. H i g h l i g h t [ R e c a l c u l a t e ] a n d p u s h
.
3. A message is displayed, and the route is
recalculated.
4. Set the route conditions. After finishing the
setting, highlight [Start] and push
.
“Procedures after setting destination”
(page 5-2)
INFO:
When a waypoint has been set on the route, the
system will search for only one route even if
route recalculation is performed.
Setting Auto Reroute
1. Push .
2. Highlight [Route Settings] and push
.
3. Highlight [Other Routing Choices] and push
.
Route guidance 5-21