FORD 2003 Windstar v.3 - Manual (Page 226)

Item Ford part
name Ford part
number Ford
specification
Power steering
fluid Motorcraft
MERCON
௡ ATF
XT-2-QDX MERCON
௡
Automatic
transaxle
(4F50N) Motorcraft
MERCON
௡V
ATF 2
XT-5-QM MERCON
௡V
Disc brake
caliper rails Motorcraft
Silicone Brake
Caliper Grease
and Dielectric
Compound XG-3 ESE-M1C171-A
Constant
velocity joints Motorcraft CV
Joint Grease
(High Temp.) XG-5 WSS-MIC25B-A1
Windshield
washer fluid Motorcraft
Ultra-clear
Windshield
Washer
Concentrate ZC-32–A WSB-M8B16–A2
1 Use only brake fluids certified to meet Ford specifications. DOT 3 fluid
is recommended. However, if DOT 3 is not available, DOT 4 fluid can be
used.
2 Ensure the correct automatic transmission fluid is used MERCON
௡ and
MERCON
௡V are not interchangeable. DO NOT MIX MERCON௡ and
MERCON
௡V. Refer to the scheduled maintenance guide to determine the
correct service interval.
ENGINE DATA
Engine 3.8L OHV V6 engine
Cubic inches 232
Required fuel 87 octane
Firing order 1-4-2-5-3-6
Spark plug gap 1.3-1.4 mm (0.052-0.056 inch)
Ignition system EDIS
Compression ratio 9.36:1
2003 Windstar (win)
Owners Guide (post-2002-fmt)
USA English (fus)
Maintenance and Specifications
226