FORD 2003 Windstar v.3 - Manual (Page 224)

Fluid Ford Part
Name Application Capacity
Engine coolant 2 Motorcraft
Premium Gold
Engine Coolant
(yellow-colored) Without rear
heater 14.0L (14.8
quarts)
With rear heater 15.0L (15.9
quarts)
Power steering
fluid Motorcraft
MERCON
௡ ATF
All Fill to line on
reservoir
Fuel tank N/A All 98.4L (26.0
gallons)
Automatic
transaxle fluid Motorcraft
MERCON
௡V
ATF
All 13.0L (13.7
quarts)
Windshield
washer fluid Ultra-Clear
Windshield
Washer
Concentrate All Fill to line on
reservoir
1 Use only brake fluids certified to meet Ford specifications. Refer to
Lubricant Specifications in this chapter. DOT 3 fluid is recommended.
However, if DOT 3 is not available, DOT 4 fluid can be used.
2 Add the coolant type originally equipped in your vehicle.
3 Use of sythetic or sythetic blend motor oil is not mandatory. Engine oil
need only meet the requirements of Ford specification WSS-M2C153–H
and the API Certification mark.
2003 Windstar (win)
Owners Guide (post-2002-fmt)
USA English (fus)
Maintenance and Specifications
224