beautypg.com

Cleaning leather seats (if equipped), Cleaning the alloy wheels, Cleaning leather seats – FORD 2013 Explorer v.1 User Manual

Page 355: Vehicle care 355

background image

If a staining liquid like coffee/juice has been spilled on the instrument
panel or on interior trim surfaces, clean as follows:

1. Wipe up spilled liquid using a clean, white, cotton cloth.

2. Wipe the surface with a damp, clean, white cotton cloth. For more
thorough cleaning, use a mild soap and water solution. If the spot cannot
be completely cleaned by this method, the area may be cleaned using a
commercially available cleaning product designed for automotive interiors.

3. If necessary, apply more soap and water solution or cleaning product
to a clean, white, cotton cloth and press the cloth onto the soiled
area–allow this to set at room temperature for 30 minutes.

4. Remove the soaked cloth, and if it is not soiled badly, use this cloth to
clean the area by using a rubbing motion for 60 seconds.

5. Following this, wipe area dry with a clean, white, cotton cloth.

CLEANING LEATHER SEATS (IF EQUIPPED)
• Remove dust and loose dirt with a vacuum cleaner.
• Clean spills and stains as quickly as possible.
• For routine cleaning, wipe the surface with a soft, damp cloth. For more

thorough cleaning, wipe the surface with a mild soap and water solution.
In Canada, use Motorcraft

௡ Vinyl Cleaner . Dry the area with a soft cloth.

• If the leather cannot be completely cleaned using a mild soap and

water solution, the leather may be cleaned using a commercially
available leather cleaning product designed for automotive interiors.

• To check for compatibility, first test any cleaner or stain remover on

an inconspicuous part of the leather.

• Do not use household cleaning products, alcohol solutions, solvents or

cleaners intended for rubber, vinyl and plastics, or oil/petroleum-based
leather conditioners. These products may cause premature wearing or
damage to the leather.

CLEANING THE ALLOY WHEELS

Note: Do not use chrome cleaner, metal cleaner or polish on wheels and
wheel covers.

Aluminum wheels and wheel covers are coated with a clear coat paint
finish. In order to maintain their shine:
• Clean weekly with Motorcraft௡ Wheel and Tire Cleaner. Heavy dirt and

brake dust accumulation may require agitation with a sponge. Rinse
thoroughly with a strong stream of water.

Vehicle Care

355

2013 Explorer (exp)
Owners Guide gf, 1st Printing
USA
(fus)