Freedom Designs Gizmo Tilt in Space - Manual (Page 29)

Gizmo
27
Flip-up Individual Footplates
The Gizmo is shipped with individual flip-up footplates
attached or a solid footboard unattached. Adjustment
of the individual flip-up footplates are as follows:
1. The individual footplates easily flip by lifting
underneath the footplate to flip up or push down
on the footplate to flip down.
2. To adjust the height of the footplate :
Remove the hex head screws on the side of the
hanger. Seat the footplate at the desired height.
Insert the screws through holes in the hanger
tube and tighten.
3. To adjust the angle of the flip-up footplate, loosen
the nylon nuts under the footplate. Set the foot
plate at the desired angle and tighten.
Main Frame
continued…..