Edge Lighting Marilyn Square - Manual (Page 3)

J BACKPLATE
2
MIRROR
PHILLIPS SCREW
2
3
G
14
12
13
12: Make sure that the backplate is grounded in accordance
with local electrical codes.
13: Connect the white socket assembly wire to neutral power
wire a wire nut.
14: Connect the black socket assembly wire to the hot power
wire with a wire nut.
H
BACKPLATE
SOCKET
ASSEMBLY
15
16
16
15: Place all wires inside the electrical box and socket
assembly.
16: Mount the socket assembly to the backplate threaded studs
with the thumb nuts.
Install the Lamp & Mirror
I
BACKPLATE
SOCKET
ASSEMBLY
1
1: Screw the lamps completely into the sockets.
CAUTION: To reduce risk of a burn or electrical shock during
lamping, disconnect the power to the fixture.
Use MAX 20 Watt Type E12 Candelabra base
Krypton/Xenon For Each Socket.
Use MAX 20 Watt Type E12 Candelabra base
Krypton/Xenon For Each Socket.
Use MAX 18 Watt Type E12 Candelabra base
Self Ballast Compact Fluorescent Spiral Lamp For
Each Socket.
2: Align the mirror brackets to the backplate brackets. Place the
mirror into the backplate and tighten the Phillips screws to
secure the mirror in place.
THUMB
NUT
THREADED
STUD