Dick SM-140 UltraSharp 230V - Manual (Page 29)

Belt grinder SM-140 29
Servicing and maintenance
9
9. Servicing and maintenance
9.1 Cleaning the belt grinder
The belt grinder must be cleaned after each work session.
WARNING
Risk of injuries due to unauthorised or thoughtless switching
on or wrong spare parts
• Always disconnect the mains plug before carrying out any
maintenance or repair work on the belt grinder.
• Only use original spare parts from Friedr. Dick GmbH & Co. KG.
WARNING
Risk of injuries due to improper repair work
• Any repair work on electric components may only be carried
out by qualified electricians.
Figure 9.1 – Cleaning the belt grinder
[1] Fastening screws
[2] Right-hand side panel
[3] Water tank
[4] Fixing bolt
1
2
3
4