Dako Artisan™ Link Pro - Manual (Page 44)

36 Dako Artisan™ Link | Basic User Guide
The drop list for the waste fluid bottle displays the following items:
 Water Soluble
 Alcohol
 Trace Metal
 Combined Dye
2. Select the waste fluid type for the bottle. The selected type displays in the field.
3. In the field below the type name, select the correct volume for the waste bottle (4L or 1.7 L).
Hint: The water soluble and combined dye bottles use the 4 liter bottles. The size
of the bottle depends on the lab use.
4. After you have assigned the waste fluid containers, click the Empty button if the bottle is
empty. The software will change the containers to white.
As the waste bottles fill up, the fill indicator in the bottle will turn green to indicate the amount of
waste in the bottle. When the fill indicator turns red, the bottle needs to be emptied .
For the route of waste flow in Artisan™ Link, refer to Appendix D | Waste Source Routes .
Load Slides onto the Slide Carousel
You are now ready to load your slides and reagent packs.
IMPORTANT Wear gloves of the correct size when handling glass slides
to prevent injury and maintain slide integrity.