Dako Artisan™ Link Pro - Manual (Page 11)

Dako Artisan™ Link | Basic User Guide 3
For systems specification, refer to Appendix A | Symbol Definitions .
Artisan™ Link Reagents
Dako Artisan™ Link special stains system uses Dako Artisan Ready-to-Use Reagents. The
reagents are packaged in a patented reagent cartridge that provides precision dispensing of
reagents.
You can use the reagent cartridges right out of the box. Reagent bar-coding enables the inventory
manager to track reagent usage and expiration dating. For list and description of Dako Reagents,
refer to the Dako website: http://www.dako.com .
IMPORTANT Be sure to select the correct country on the website. The selection
button is in the upper right-hand corner. Reagents can have different regulatory approval
statuses in different countries. You must use only those reagents that follow the
regulations required in your country. If you have questions concerning the reagent
approval status in your country, please contact your local Dako representative.
Artisan™ Link Configurations
Artisan™ Link can be used to connect up to three instruments. It can be used as a stand-alone
system or a networking system using a LAN system, or a Laboratory Information System (LIS).
The procedures for using Artisan™ Link are the same, whether you are on a stand-alone system, a
LAN, or an LIS.
Note: The Lab Manager or System Administrator may be in charge of system
administration, depending on the lab or organization.
Contact your Lab Manager or System Administrator to determine custom settings that were
configured for your workstation and your lab.