Using the nd filter shooting with slow synchro, Ilter (p. 99), Nd filter (p. 99) – Canon PowerShot G11 User Manual
Page 99: Co py
99
The ND filter reduces light intensity to 1/8 (3 stops) of the actual level,
allowing for slower shutter speeds and smaller aperture values.
Choose .
●
After pressing the
m button, press the
op buttons to choose
.
Set [ND Filter] to [On].
●
Press the
qr buttons or turn the  dial
to choose
, then press the
m button.
You can make the main subject, such as people, appear bright by having the
camera provide the appropriate illumination with the flash. At the same time,
you can use a slow shutter speed to brighten the background that the light
from the flash cannot reach.
Choose
….
●
After pressing the
r button, press the qr
buttons or turn the
 dial to choose …,
then press the
m button.
X
Once set,
… will appear on the screen.
Shoot.
●
Even if the flash fires, ensure that the
subject does not move until the shutter
sound ends.
Using the ND Filter
Attach the camera to a tripod to prevent camera shake.
Shooting with Slow Synchro
Attach the camera to a tripod to prevent the camera from moving and
blurring the image. It is recommended to set the [IS Mode] to [Off] when
shooting with a tripod (p. 155).
CO
PY