Canon PowerShot G11 - Manual (Page 155)

Changing Shooting Functions
155
X Items with a will display.
Changing the IS-Mode Settings
● Choose [IS Mode], then press the
qr buttons
to choose an option.
Shooting Info
Displays shooting information
(p. 44).
Grid Lines A grid overlays the display.
3:2 Guide
The areas outside the 3:2 range are
grayed out. This area will not print
when printing on paper with a 3:2
aspect ratio.
Histogram
Histogram displays in shooting
modes
G, M, B, D (p. 46).
If you press the shutter button halfway and return to the shooting screen
from the custom display settings screen, the settings will not be saved.
Gray items can also be set, however, they may not display depending on
the Shooting mode.
Continuous
Image stabilization is always on. You
can confirm the result directly on the
display, which makes it easier to check
the composition or focus.
Shoot Only
Image stabilization is only active at the
moment of shooting.
Panning
Image stabilization only counters up
and down motion. This option is
recommended for shooting objects
moving horizontally.
• If camera shake is too strong, attach the camera to a tripod. It is
recommended to set the IS Mode to [Off] when the camera is attached
to a tripod.
• When using [Panning], hold the camera horizontally. Image stabilization
does not work when the camera is held vertically.
CO
PY