List of messages that appear on the screen, Co p y – Canon PowerShot G11 User Manual
Page 178
178
If error messages appear on the screen, try one of the following solutions.
No memory card
•
The memory card is not installed in the correct direction. Install the memory card
in the correct direction (p. 16).
Card locked!
•
The SD memory card or SDHC memory card’s write protect tab is set to “LOCK”.
Unlock the write protect tab (p. 18).
Cannot record!
•
You attempted to shoot an image without the a memory card, or with a memory
card installed incorrectly. Install the memory card in the correct direction when
shooting (p. 16).
Memory card error (p. 53)
•
Contact your Canon Customer Support Help Desk as there may be a problem
with the camera.
Memory card full
•
There is not enough free space on the memory card to shoot (pp. 25, 55, 71, 87)
or edit images (pp. 138 – 142). Erase the images (pp. 29, 133) to open space for
new images, or insert an empty memory card (p. 16).
Change the battery pack (p. 14)
No image.
•
There are no images recorded on the memory card that can be displayed.
Protected! (p. 130)
Unidentified Image/Incompatible JPEG/Image too large./Cannot
play back AVI/RAW
•
Unsupported images or data, or corrupted image data cannot be displayed.
•
Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not display.
Cannot magnify!/Cannot rotate/Cannot modify image/Cannot
register this image!/Cannot modify/Cannot assign to category
•
Incompatible images cannot be magnified (p. 127), rotated (p. 137), edited
(pp. 138 – 142), registered to the start-up screen (p. 159), categorized (p. 135),
or added to a print list (p. 144).
•
Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not be magnified, rotated, edited,
registered to the start-up screen, categorized, or added to a print list.
•
Movies cannot be magnified (p. 127), edited (pp. 138 – 142), added to a print list
(p. 143), or registered to the start-up screen (p. 159).
List of Messages that Appear on the Screen
CO
PY