Co py – Canon PowerShot G11 User Manual
Page 124
Viewing Images in Filtered Playback
124
Viewing images using filtered
playback.
●
Pressing the
m button will start filtered
playback, and the jump method and a
yellow frame will appear.
●
If you press the
qr buttons or turn the
 dial, the chosen target images will
display.
●
Pressing the
d button displays [Filtered
playback settings cleared]. Pressing the
m button cancels filtered playback.
Jump by and Images
●
In single image playback, press the
d
button, then press the
op buttons to
choose a jump method.
●
If you press the
qr buttons, the display
will advance to the image that is the
chosen number of images away.
●
Pressing the
n button restores the
single image display.
When you choose
in Step 1 on p. 123, if there are only images with the same
date, you can only choose one filter. Also, you can only choose
if there are no
images sorted into categories in
.
In filtered playback (Step 2), you can view filtered images with “
Images Using Index Display” (p. 122), “Viewing Slideshows” (p. 125), and
“Magnifying Images” (p. 127). You can process all filtered images at once while
performing operations in “Protecting Images” (p. 130), “Erasing All Images”
(p. 133), or “Printing from the Print List (DPOF)” (p. 143), by choosing [All Filtered
Images]. However, if you change the category (p. 135), or edit an image and save
it as a new image (p. 138), a message will appear, and filtered playback will
cancel.
What if you can’t choose a filter?
Filtered playback
CO
PY