Canon A-1 - Manual (Page 13)

Semi-hard Case
To protect the camera, particularly when
carrying, it, insert it into its semi-hard case
as indicated in the photo A. You can
easily shoot pictures even with the camera in
the semi-hard case by turning the top cover
down. If you wish to remove the top cover,
turn it down, slide it straight up in the
direction of the arrow and pull it out as
indicated in the photo B. To replace the
cover, insert its hook into the corresponding
hole on the case and pull it straight down.
For closing the top cover, the lens' focusing
ring should be turned to infinity (I).
Lens Cap and Rear Dust Cap
The front and rear lens caps should always
be on the lens when the lens is not on the
camera. For protection when the lens is
mounted on the camera but not in use,
please see to it that the front lens cap is
attached.
Lens Cap
Most Canon lenses are provided with a clip-
on front lens cap which is easily attached
and removed from the front of the lens by
pressing in the tabs on both sides of the cap.
This type of cap may also be attached to a
Canon filter screwed into the lens.
Not For Resale – Free Download at http://www.joe-chan.com/manuals
–13–
HANDLING THE LENS