Cleaning the pickup roller – HP LaserJet 1320 User Manual
Page 89

Cleaning the pickup roller
If you want to clean the pickup roller rather than replace it, follow the instructions below:
1. Remove the pickup roller as described in steps 1 through 9 of
.
2. Dab a lint-free cloth in water, and scrub the roller.
3. Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt.
4. Allow the pickup roller to dry completely before you reinstall it in the printer (see steps 10
through 17 of
ENWW
Cleaning the pickup roller
79
This manual is related to the following products: