Headset mode activation/deactivation, Headset prior – Yealink SIP-T26P User Manual
Page 60
User Guide for the SIP-T26P IP Phone
48
To activate the headset:
1. Press on the phone.
The HEADSET key LED illuminates solid green when
the headset mode is activated
.
Press the line
key or the Answer soft key to answer a call. The call will connect to your
headset automatically. Enter the desired number and press the Send soft key, then
the phone will place a call using the headset automatically. For more information on
using the headset to place a call, refer to
on page
To deactivate the headset:
1. Press again on the phone.
The HEADSET key LED goes out when the headset mode is deactivated.
You can use headset in priority when enabling headset prior. This feature is especially
useful for permanent or full-time headset users.
To enable headset prior via web user interface:
1. Click on Features->General Information.
2. Select Enabled from the pull-down list of Headset Prior.
3. Click Confirm to accept the change.