Yealink SIP-T26P User Manual
Page 41
Customizing Your Phone
29
To select a ring tone for the account via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Basic.
4. Select the desired ring tone from the pull-down list of Ring Type.
If Common is selected, this account will use the ring tone selected for the phone.
Refer to the above instruction.
5. Click Confirm to accept the change.
Note
To upload a custom ring tone for your phone via web user interface:
1. Click on Settings->Preference.
A ring tone for the account is configurable via web user interface only.
The ring tone for an incoming call on the phone may be different. For example, when the
phone receives an incoming call from a contact stored in the local directory, it will play
the ring tone assigned to the contact in the contact directory (refer to
If no ring tone is assigned to the contact, the phone will play the ring tone assigned to the
associated group (refer to
). Otherwise,the phone will play the ring tone
assigned to the account. If no ring tone is assigned to the account, the phone will play the
ring tone assigned for the phone.