Cooper Instruments & Systems DFI INFINITY B Ultra High Performance Digital Force Indicator - Manual (Page 18)

15
4.5.3 Device Setup
• Device Setup helps you to see eight different variables or devices by “Check” box.
• Up to four different devices or parameters can be modified.
• Device Address or ID is in Hex format. See Appendix D for conversion.
Figure 4.8 Device Setup
4.5.3.1 Modify Device Parameters (or Device List Entry)
Figure 4.9 Modify Device Parameters
MODIFY DEVICE PARAMETERS
DEVICE PARAMETERS
http://192.168.1.200 Address
Device No. 1
Main Menu
Device Address *
SP1 Command R21
SP2 Command R22
R23
R24
SP3 Command
SP4 Command
Display Units Deg. C
Display Format decimal
Device Name INFB
Reading Command X01
Update Reset
Cancel
DEVICE SETUP
DEVICE SETUP
http://192.168.1.200 Address
Take Readings
Update Checked Box
Click on Device No. on the left to modify Device Parameters.
Main Menu
No.
1
2
3
4
5
6
7
8
Device Name
INFB
ABCDEFGH
ABCDEFGH
ABCDEFGH
ABCDEFGH
ABCDEFGH
ABCDEFGH
ABCDEFGH
Display Units
Deg. C
ABCDEFGH
ABCDEFGH
ABCDEFGH
ABCDEFGH
ABCDEFGH
ABCDEFGH
ABCDEFGH
Address
*
*01
*01
*01
*01
*01
*01
*01
Reading
X01
X01
X01
X01
X01
X01
X01
X01
SP1
R21
R01
R01
R01
R01
R01
R01
R01
SP2
R22
R02
R02
R02
R02
R02
R02
R02
SP3
R23
R03
R03
R03
R03
R03
R03
R03
SP4
R24
R04
R04
R04
R04
R04
R04
R04
Display
Format
decimal
raw
raw
raw
raw
raw
raw
raw
Check
Click on numbers for
Device Parameters