Bio-Rad Model EM-1 Econo™ UV Monitor - Manual (Page 10)

7
Socket Function
Auxiliary Socket Input/output to allow the UV
monitor to be used with
equipment other than the
Bio-Rad components. See
Section 7 and Appendix C.
4.3 Optics Module
Fig. 4.3. The optics module.
Filter Tray Contains filters for 254 nm and 280 nm. See
Section 5.2 for wavelength selection.
Fluid In/Out Ports Female luer fittings allow convenient
plumbing. (Slip fittings have been provided to
facilitate the use of PTFE tubing.)
Rack Mount Allows simple mounting on a rack or the top
of control unit.
Power/Signal Cord For connection of the optics module to the
socket on the rear panel of the control
unit.
Lamp Housing See Appendix B for lamp replacement.
Flow Cell See Appendix A for flow cell replacement.
Compartment
Rack Mount
Filter Tray
Lamp Housing
Flow Cell
Power/Signal
Cord
Fluid In/Out Ports
(Note arrows on
the top side)
M7318160G.qxd 05/08/2003 2:05 PM Page 7