Canon VB-C500D - Manual (Page 77)

3-7
Input/Output Terminals
Appen
dix
Internal Connection Diagram
Audio Input/Output Terminals
One audio input terminal and one audio output terminal is available.
A microphone, speaker with amplifier or other audio input/output device can be connected to the
camera to send/receive sound via the viewer.
To connect the camera to an audio input/output device, use a dedicated audio interface cable
WA500-VB.(P. 1-22)
Use a
Φ3.5 monaural mini jack connector to connect the audio interface cable and audio input/
output device.
Audio Input, Used as Both LINE IN and MIC IN (Monaural Input)
Connects the camera to a microphone. As for audio input of this camera, two types of
microphones, LINE IN and MIC IN types, are supported. Note that the camera only has one audio
Tip
Applicable wire for external device cable
Single wire of AWG No. 28 to 22
Conductor size Φ0.32 to 0.65 mm (Φ0.013 to 0.026 in)
Strip the cable by approx. 8 to 9 mm (0.31 to 0.35 in)
Inter
nal controller
External device
External
device
Input terminal:
IN1, IN2
Output terminal:
OUT1, OUT2
10k
Ω
10k
Ω
10k
Ω
+3.3V
+
–
0.1 µ F