Canon VB-C500D - Manual (Page 75)

Appen
dix
3-5
Input/Output Terminals
The various input/output terminals of the camera are located inside the cable cover at the bottom
of the camera.
To connect the camera to an audio input/output device, contact input/output device, AC adapter
or external power supply, open the cable cover and connect the device using a dedicated
interface cable. All interface cables come with dedicated terminals for connection with the camera.
Check the shape of each terminal thoroughly and insert the terminal in the correct direction.
External Device I/O Terminals
Two external device input terminals and two external device output terminals are available.
VB-C500 Viewer and VK-Lite Viewer can be used to check the conditions of external device
inputs and operate external device outputs. ("Operating the External Device Outputs" and
"Displaying the External Device Input Status" in Operation Guide).
To connect the camera to an external device, use a dedicated I/O interface cable WC500-VB.
(P. 1-23)
The table below lists the colors and functions of spare wires in the I/O interface cable.
External device
I/O terminals
Power connection
terminal
Audio input/output
terminals
Black
Brown
Red
Orange
Yellow
Green
Blue
White