Canon VB-C500D - Manual (Page 56)

2-14
Step 3 Perform Initial Setting of the Camera
3. The viewer starts and video captured by the camera is displayed.
This completes the video check process.
Note
Clicking [Setting Page] or [Admin Viewer] on the top page of the camera displays each
user authentication window.
The factory-set user name and password are as follows:
User name: root Password: camera
Authentication Window Accessed via Authentication Window Accessed via
Setting Page Admin Viewer
Be sure to change the administrator password for security reasons ("Administrator
Password" in Operation Guide).
To display both JPEG and MPEG-4 video, install and use VK-Lite Viewer (
P. 1-7).
Where video can be transmitted to is not limited by the factory settings, etc.
To use the camera for surveillance purposes, etc., be sure to set the [Access Control]
options on the setting page. ("Setting User Access Privileges (Access Control)" in
Operation Guide).
Tip
For information on how to use VB-C500 Viewer, see Operation Guide.
When [Setting Page] is clicked, various options can be set. ("Accessing the Setting Menu"
in Operation Guide).