Bio-Rad Experion DNA Analysis Kits User Manual
Page 25

Technical Support: 1-800-424-6723 • www.bio-rad.com
17
Installation Qualification
Experion Electrophoresis Station – Serial Number______
Table VI: Hardware IQ Electrophoresis Station Setup
Item
Description
Performed by/date
1
Connect one end of the supplied power cable to the electrophoresis
station and the other end to a grounded AC outlet rated 10 A/100–240
VAC.
2
Connect the electrophroresis station to your PC via the USB 2.0
cable.
Comments:_________________________________________________________________________
Performed by:_________________________________ Date:_______________________________
Reviewed by:__________________________________ Date:_______________________________
This manual is related to the following products: